一区一精品-一区小说二区另类小说三区图-一区视频在线-一区免费视频-久久精品美女-久久精品毛片

Your location:Home > News > Company news
Company news

Fire prevention measures during high-speed rolling of aluminum foil

AddTime:2020-05-28 14:49:15   Views:     【 Big Mid Small 】   Print   Close

Aluminum foil rolling must have three conditions for fire or explosion: combustibles, combustion aids, fire source and high temperature. Without any of these conditions, it will not burn or explode.

The oil vapor and oxygen in the air produced by high-speed aluminum foil rolling are unavoidable. Therefore, the key to the safety and fire prevention of high-speed aluminum foil rolling mills is how to eliminate the fire source and the high temperature caused by local overheating. The main measures are as follows:

1. In high-speed aluminum foil rolling, it is difficult to avoid the generation of high-concentration oil vapor around the rolling mill. In order to minimize the concentration of oil vapor, the normal operation of the smoke exhaust device should be ensured and the exhaust air volume should be maximized.

2. Strengthen the spot check and inspection of the oil mist lubrication system of the work roller, support roller and guide roller to ensure that the oil level, oil pressure, wind pressure and temperature of the oil mist generator meet the requirements, and the connection pipeline between the oil mist generator and the bearing box It should be unblocked to provide adequate lubrication conditions. Poor lubrication of oil mist is one of the main causes of fires in rolling mills. In production, the oil mist lubrication system should be managed in a key manner, and problems should be stopped in time to deal with them.

3. Strengthen the inspection and management of the inner rings and bearings of the rolls. Each roll change should be checked, and the defective parts should be repaired and replaced in time.

4. In the place where there is oil vapor, explosion-proof electrical equipment must be used, and the power supply of the spreader should be cut off in time after the crane spreader is removed.

5. The broken belt protection device should be sensitive and effective, the thickness of the aluminum foil blank should be uniform, and no sudden thickening is allowed to avoid the occurrence of plugging. In operation, the rolling mill speed should be properly reduced at the end of the coil.

6. Improve the operation level, reduce the broken belt, and clean the broken aluminum pieces in the mill body and the oil collection tray in time. The mill body, pipeline oil tank, etc. should be well grounded.

7. Reasonably choose base oil and additives.

8. Strict use of open flame operation system. Before using open flame operations in the fire protection area, flammable and explosive materials around the operation area should be cleaned up in time, and professional firefighters and security officers should implement safe fire protection on the site.

9. Ensure the reliability of safety fire protection devices.

10. Strengthen the education of employees. Every employee should understand the general knowledge of safety and fire prevention, the correct use of fire extinguishing equipment, fire extinguishing equipment, and keep in mind the fire alarm phone number. When a fire occurs, the fire extinguishing measures should be taken first, and the fire alarm phone should be dialed at the fastest speed to avoid delaying the fire extinguishing time.

The causes of fire accidents in the production of aluminum foil are various, including production technology, production safety management and production equipment.


Prev:The rolling forms of aluminum casting and rolling mills are divided into: continuous casting and rolling (double-roll casting and rolling), aluminum sheet casting and rolling mills  Next:Method of using aluminum casting and rolling mill

Back To Top
contact
  • ADD

    Development Zone, Zhuozhou City, Hebei Province

  • TEL

    +86-312-5522788

  • Follow WeChat

  • Enter mobile

Copyright ? Zhuozhou Feiya Machinery Co., Ltd.  http://m.92711.com.cn  All Rights Reserved   冀ICP備20012391號-1   Website designSANJIN  
主站蜘蛛池模板: 久久精品免费视频6| 日韩高清一级毛片| 日本视频在线免费看| 黄色短视频网站| 青草香蕉精品视频在线观看| 欧美日韩在线播放一区二区三区| 久久久久久综合| 国产午夜亚洲精品国产| 久久有精品| 亚洲人成网站在线观看青青| 亚洲天堂男人天堂| 欧洲一级片| 2021国产精品最新在线| 四虎成人4hutv影院| 欧美成人精品高清在线播放| 日韩 欧美 亚洲| 日本免费在线| 欧美日韩一级视频| 国产91香蕉在线精品| 久久99久久99精品免观看不卡| 久久99国产亚洲高清观看韩国| 免费jjzz在在线播放国产| 成人区精品一区二区毛片不卡| 伊人久久免费| 青青青草视频| 国产精品1234区| 欧美在线第一二三四区| 青草久草视频| 久久久久四虎国产精品| 日韩一区三区| 亚洲欧洲精品成人久久曰影片 | 国产性精品| 九九全国免费视频| caoprom在线视频| 黄色免费小网站| 国产欧美一区二区三区在线| 亚洲一区二区三区免费观看 | 综合久久久久久| 99久久久久国产精品免费| 久久精品综合| www.国产精品|